BLADE REPLACEMENT
• To remove or replace the blade, make sure the power switch is in the off
position. Unplug the unit from the accessory cord if in use. Turn the blade
adjustment knob to the longest (highest) setting, extreme left. Then pull down
on the blade while holding the unit securely.
• To replace the blade, align the tab on the blade set
with the tab receptacle on the clipper and push the
blade in. If you encounter difficulty doing this, then
turn the adjustment ring left or right until it stops
and repeat the procedure.
BLADE COMB ATTACHMENTS
ATTENTION: STAINLESS STEEL METAL GUIDE COMBS TO BE USED ONLY ON ANIMALS.
Your unit comes with several blade comb attachments. These are provided to
increase the functionality and enjoyment of your unit. The size of the comb is
located on the bottom of the comb attachment. To achieve the correct lengths for
each comb attachment set adjust the length of the blade to the smallest cutting
length.
NOTE – ONLY REMOVE THE BLADE WHEN ADJUSTMENT INDICATOR IS
IN THE POSITION OTHERWISE BOTH THE BLADE AND CLIPPER MECHANISMS
COULD BE DAMAGED
INSERTING THE COMB ATTACHMENT
• Insert the cutting edge of the blade into the comb attachment.
• Snap it tight at the back end of the blade by pushing down on the Guide
Comb Attachment.
REMOVING THE COMB ATTACHMENT
• Push up on the Guide Comb Attachment until it releases from the metal blade.
• Continue lifting the Comb Attachment away from the cutting edge of the
blade until the Comb Attachment is free.
7
WARNING
BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY.
1. The battery must be removed from the appliance before it is scrapped.
2. The appliance must be disconnected from the supply mains when removing
the battery.
3. The battery is to be disposed of safely.
Disposal in E.U. countries
Do not dispose of the appliance with domestic refuse. As part of
the E.U. Directive governing the disposal of electric and electronic
appliances, please discard unwanted batteries and/or battery
operated products at your local recycling center. Correct disposal
will ensure environment protection and prevent a potential
harmful impact on people and the environment.
For battery removal or maintenance and/or repair of this appliance
please contact an Authorized Service Center.
Disposal in non-E.U. countries
Please dispose of the appliance at the end of service life in an environmentally
friendly manner, in accordance with national, state,and local laws and
regulations.
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Unit may not start when
unplugged and turned on
Quickly
When the unit is
unplugged & turned ON
(I)– the memory will
always “RE BOOT” itself
Turn the clipper in the
OFF
(O)
position, and
then turn the clipper to
the ON (I) position to
start
SERVICE INFORMATION
How and Where to Get Service
INFORMATION • DO NOT DESTROY • READ CAREFULLY
The foundation of our business has been built upon the principle of service
to the user, both in designing superior products and in keeping them in
condition to give long-lasting use. That is why we back up our reputation for
manufacturing top-quality products by providing the finest service facilities
possible for adjustment and repairs, when necessary. Please retain the original
packaging materials and carton, if possible, to facilitate the packaging of the
product if service is required.
8
