English-7
5. If water reservoir runs dry, unplug iron and refill with water. Iron may be filled with
water while hot.
NOTE:
It may be necessary to re-prime pump before using shot of steam
feature again.
VERTICAL SHOT OF STEAM
Vertical shot steam feature allows your iron to function as a garment steamer.
TIP:
When using vertical shot of steam on clothing, hang clothing on a clothes
hanger for best results. Hanging curtains and drapes may also be steamed.
How to use Vertical Steam:
1. Allow iron to warm up (2 minutes).
2. Hold iron in a vertical position, with iron close to but not touching fabric you want
to steam.
3. With your other hand, pull fabric tight.
4. Press shot of steam button in approximately 3-second intervals as you move iron
across wrinkled area.
WARNING:
To prevent risk of burns, keep your hand away from area being steamed.
WARNING:
DO NOT steam garments while wearing them; this may result in injuries.
IRONING TEMPERATURE
Check ironing instructions on label of item that you wish to iron. Check temperature
settings table for further instructions.
Should specific ironing instructions not appear on label, follow instructions on
temperature settings table. This table is only valid for fabrics indicated and does not
apply to special textiles with a gloss finish, etc. Textiles with special coatings (such as
gloss, relief wrinkles, etc.) are best ironed at very low temperatures. If textile consists
of several different types of fibers, always select lowest temperature, i.e. temperature
recommended for most delicate fiber in composition (for example, if composition
consists of 60% polyester and 40% cotton, you should iron at temperature indicated
for polyester).
SETTING TEMPERATURE
1. Set iron in an upright position.
2. Connect iron to an electrical wall socket.
3. Set temperature control dial (Models GCSTCS2001 & GCSTCS2001)/
temperature control up and down buttons (Model GCSTCS2003) (figure 4) to the
correct ironing temperature as indicated on label or temperature settings table.
