Mode and Intensity
In total 10 modes, 25 levels of intensity.
1. Mode: in total 10 modes (1 automatic mode + 9 manual modes).
(1). Automatic mode (M0): Each mode work 1 min, and change to the next mode
automatically, and later circulating like this.
(2). Manual mode (M1-M9): you can adjust from 1 to 9 mode, manually change
from one mode to another.
2. Intensity: in total 25 levels, can be adjusted between 00~25.
How to program the different modes.
1. When you turn on the main machine, it is the automatic mode at first. Just press
the ‘ON/OFF’ button to adjust the modes. When you press once, it is mode 1, press
double times, it is mode 2, pressing like this to adjust the modes.
2. After you confirm the mode, just press ‘+’ and ‘–’ button to adjust the levels of
intensity. You can adjust the intensity in each mode.
Frequency and intensity of using
Important
• Use once per day and per area used, use a weak level when using it for the first
time, once you are used to a weak level, adjust the level as desired.
1. Attach the product to the area where you wish to use it.
• Wipe any sweat off the area to be used before attaching.
• Touch the adhesive (gel surface) as little as possible.
• Stick the gel sheet to your skin, if there is a gap where it is stuck on, electricity
will not flow uniformly across the entire surface of the gel sheet and you may feel
a strong stimulus or pain.
Usage Instructions
Gel sheets are consumables, replace with a new sheet at the following times
• Obviously feel the conduction performance decreased, cause decreased
strength.
• When it loses its adhesiveness, the adhesive surface (gel) dries out or is gouged
or dirt/grime that cannot be removed exists.
1. Take a pad out of the bag.
2. Install main machine on the pad. The electrode button is aligned with the
electrode hole of the main machine.
3. Remove the film on the gel pad.
4. Attach the pad with the main machine to your body.
Features
In view of the massage needs from different parts of the body, perfect fit the body
curve, focus your attention on the location of the need to exercise more.
Is not affected by time or place, no matter when and where you can follow one's
inclinations of exercise.
Using light and durable silk screen printing, the current effective conduction to
patch
Attached with a type of soft rubber patch, good adhesiveness, not gooey, current
can be evenly to the body.
ON/OFF
ON/OFF
Turning the power ON
Indicator
Turn the
power on
Important
• If a gel sheet is not in contact with the skin, do not turn it on. Doing so may cause
injury or burns.
When the power is switched on, the indicator is light and it is regarded as the
normal working state.
- 5 -
- 6 -
