12
Long PID Names
Long PID Names
allows the user to enable/disable the tool scrolling
the complete PID name on the bottom line of the display while viewing
Live Data
or viewing
Freeze Data
.
From the
System Setup
menu, use the ▲
UP
or ▼
DOWN
arrow keys until
Long PID Names
is highlighted, then press
ENTER
.
Select ON or OFF as desired using the ▲
UP
or ▼
DOWN
arrow keys, then press
ENTER
to save or
BACK
to
r e t u r n t o
S y s t e m Setup
.
State OBD Check (Emissions)
The State OBD Check function is used to display a basic status of the
vehicle’s OBD system.
The State OBD Check function has the following areas:
MIL STATUS ON or OFF
Number of Codes Found
Number of Monitors OK
Number of Monitors Inc
Number of Monitors N/A
9
State OBD Check should be done with the key on engine
running (KOER) due to showing MIL status.
9
The number of codes found are both
Confirmed
and
Permanent
codes.
Pending
codes are not included.
9
The number of Monitors that are either OK, INC or NA are
only
Since DTCs Cleared and
not
This Drive Cycle.
9
Refer to
Read Codes
and
I/M Monitors
for more detailed
information about the results.
