16
On
Non-CAN vehicles
the Tool displays:
test data (test ID)
maximum value (MAX)
test measurements (MEAS)
minimum value (MIN)
status (STS)
measurements and specification values are hexadecimal
numbers (i.e., $1A, $FE, $11.)
module (MOD)
OR
On
CAN vehicles
the Tool displays:
Test performed. The test performed can be $## if test is not
defined. Refer to vehicle service manual for details.
Measured values and units of measure (such as volts, amps,
seconds).
Status of monitor test data.
Module ID where the monitor test data came from.
On-Board Systems
The
On-Board Systems
test allows the Tool to control operation of
vehicle components, tests, or systems.
9
Some manufacturers do not allow tools to control vehicle
systems. A vehicle not supporting an on-board system is
identified by a message displayed when selected.
9
Refer to the appropriate vehicle service manual for on-board
systems instructions.
9
After selecting
On-Board Systems
, a list of on-board
systems and components available for testing are shown on
the display.
