―E10―
5. CARRYING AND INSTALLING OF THE WIRE FEEDER(continued)
WARNING
When using the wire feeder at a high place or in hung condition, observe the following
precautions to prevent serious personal injury due to fallen wire feeder or wire reel.
●
●
●
●
For hanging the wire feeder, use a metal hanger structured to prevent falling and hang the wire
feeder in a safe and secure manner.
●
When hanging the wire feeder, use the hanging bracket (optional bracket of part number
U30022Z00).
●
●
●
●
Do not hang the wire feeder using the handle of the wire feeder as shown in the diagram
below.
●
●
●
●
Do not install or hang the wire feeder in a posture, resulting in falling of the reel as shown in
the diagram below.
●
When installing the wire feeder at a high place, be sure to install and secure it on a horizontal
surface.
Reel installation angle is normal
A force in dropping direction is applied to the reel.
This condition is dangerous.
Installation on a
horizontal surface
Normal hanging
Hanging bracket
(option)
Hanging with handle
Installation on an
inclined surface
Inclined hanging
