background image

50

51

  About     Getting started     Daily use     Warnings     

More info

  

Waste from electronic 
equipment must be 
handled according to 
local regulations.

The manufacturer declares that this 

transmitter is in compliance with the  

essential requirements and other rele-

vant provisions of Directive 2014/53/EU.

Declaration of Conformity is available at 

the headquarters website www.oticon.

global/doc.

This medical device complies with  

Medical Device Regulation (EU) 

2017/745. 

Declaration of Conformity is available at 

the headquarters. 

Oticon A/S

Kongebakken 9

DK-2765 Smørum

Denmark

www.oticon.global/doc

SBO Hearing A/S
 
 
Denmark

Note:

This equipment has been tested and 

found to comply with the limits for 

a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits 

are designed to provide reasonable 

protection against harmful interference 

in a residential installation. This 

equipment generates, uses and can 

radiate radio frequency energy and, if 

not installed and used in accordance 

with the instructions, may cause harmful 

interference to radio communications. 

However, there is no guarantee that 

interference will not occur in a particular 

installation. If this equipment does 

cause harmful interference to radio 

or television reception, which can be 

determined by turning the equipment  

off and on, the user is encouraged to  

try to correct the interference by one  

or more of the following measures:

—  Reorient or relocate the receiving 

antenna.

—  Increase the separation between the 

equipment and receiver.

—  Connect the equipment into an outlet 

on a circuit different from that to which 

the receiver is connected.

Changes or modifications not expressly 

approved by party responsible for 

compliance could void the user’s 

authority to operate the equipment.

Summary of Contents for BiCROS






























Reviews: