16
17
Volume Control (optional)
A volume control may be activated.
The volume control allows you to adjust the volume in specific listening situations to
the level you feel comfortable with.
To
increase volume,
shortly press the upper part of the push-button.
To
decrease volume,
shortly press the lower part of the push-button.
When the hearing instrument is turned on, it starts up at a preferred volume level.
When adjusting the volume control to the preferred level, this is indicated by a beep.
Using 2 instruments
If you have two Ino Pro instruments the push-button on one instrument can be pro-
grammed to adjust the volume on both hearing instruments (Binaural Coordination).
This means, when you adjust the volume for one instrument, it automatically adjusts
the other.
Standby (optional)
Press the button for a minimum of 3 seconds to set the instrument in standby mode.
To reactivate the instrument, push the button shortly again.
Use the standby function if you need to silence the instrument while you have the
instrument on.
Note: pushing either side of the button will set
the instrument on standby.
WaRnIng
Do not use the standby function as a switch
off as the hearing instruments still draws
current from the battery in this mode.
Push
3 sec
Summary of Contents for Ino Rite
Page 1: ...InSTRuCTIonS FOR USE RITE...
