52
OTICOn InTIGA FITTInG GUIDE
53
End Fitting
The End Fitting step covers all tools that are related to user
operations of the instrument as well as Streamer.
The Save and Exit screen contains information about the
Oticon Intiga instruments. It also gives you the possibility
to link one or two Streamers to the instruments.
To link a Streamer to the instruments, click “Read serial
number” and follow the instructions provided on the
screen. It is possible to link two Streamers to the same
instrument. If only one Streamer is in use, leave the second
serial number field empty.
If your instruments are connected via HI-PRO you cannot
use the automatic read-out. Instead you need to type in
the serial number of your Streamer.
You find the number in the silver area on the back of
Streamer. Click Save, Program and Exit before disconnect-
ing the hearing instruments.
Real Ear Measurements
The Genie REM tool lets you verify your fitting by compar-
ing your Real Ear Measurement equipment with Genie.
Use the tool to activate or deactivate advanced features to
match the purpose of the measurement.
To compare your measurement to target and simulated
curves in Genie, make sure that the Genie curves are based
on the same signal type and level as measured.
