70
OTICOn InTIGA FITTInG GUIDE
71
(For installation of the TV Adapter refer to the Installation
Guide and Genie Instruction Videos.)
Pairing
1.
To prepare the TV Adapter and Streamer as a pair, the
devices must be placed close together. Place Streamer
next to the TV Adapter (less than 30 cm /1 ft between
devices. TV Adapter turned on).
2.
Assure that Streamer’s key lock is deactivated.
3.
Press Streamer Connect button for 6 seconds until the
blue light starts flashing rapidly.
4.
The two devices are now establishing a connection to
each other.
5.
Within one minute the TV Adapter connects to Streamer
and pairing is complete.
— The orange STATUS indicator on the TV Adapter shows
a solid light when the pairing is successful.
Pairing is done only once and will normally not have to
be repeated.
Daily Use
TV listening
Wear Streamer around the neck with the neck strap.
Streamer must be within 10 metres of the TV Adapter.
START sound
— Press and release the Audio button. Streamer connects
to the TV Adapter.
— After a few seconds, an orange light is shown on
Streamer and the TV Adapter.
— The hearing instruments will receive the TV sound.
STOP sound
— Press and release the Audio button.
— Streamer disconnects from TV Adapter.
— All orange lights turn off and the hearing instruments
return to the standard program (P1).
Streamer and the TV Adapter
To turn off the blue light immediately, activate the key
lock slider.
Incoming calls
A ringing tone is heard in the hearing instruments and
the green rim light around the Phone button flashes.
Answer
Press Streamer’s Phone button shortly. Streamer answers
the call and the green rim light will switch to constant light.
The call is now directed into the hearing instruments.
Talk in direction of the microphone on Streamer.
Reject call
Long press on the phone button will reject the call.
Hang up
Press Streamer’s Phone button shortly. Streamer hangs up
the call, the green rim light turns off and the hearing
instruments return to the previous program.
Make a call
Use the mobile phone to make the call (assuming that
Connect is on, the mobile phone will automatically connect
to Streamer). When the call goes through, talk into
Streamer – do not press the Phone button on Streamer.
