16
17
To replace the battery, follow these instructions:
• Open the battery door completely by pushing the raised edge at the bottom of the
hearing aid. Remove the old battery. The magnet at the end of the MultiTool may be
useful in helping you with the handling of the batteries.
• Remove the sticky label from the + side of the new battery.
• The new battery may be inserted by using the magnetic end of the MultiTool. Ensure
that the positive (+) marking faces the positive (+) sign printed on the battery door.
Close the battery door.
Any moisture on the battery surface should be wiped
off before use.
When you replace the battery, it will take a few
seconds before the battery works.
MultiTool
Replacing the battery
The BTE13 90 uses a battery size 13. The BTE312 75 uses a
battery size 312.
A worn out battery should be removed immediately and
disposed of according to local regulations.
When the battery power is low, the visual indicator (LED)
will rapidly blink and the user will hear 2 beeps (if enabled).
This pre-warning starts when the battery has only a few hours
of operation left. The 2 beeps will be repeated in moderate
intervals to indicate it is time to change the battery.
If the battery runs out the hearing aid turns off. When that
happens, 4 beeps are played and the visual indicator (LED) will
turn off (if enabled) to indicate that the hearing aid is no longer
operating.
Replace the battery.
Summary of Contents for sensei BTE13
Page 1: ...Instructions for use BTE...
