motion-detect recording
—>
Under Motion-Detection
Selected zone (s) is under
motion-detection and any movements
detected from these zones will trigger
motion-detect recording
Motion sensitivity:
Options—Low/ Normal/High
Setup motion sensitivity according to the
surveillance environments
Motion Time:
Options—10 secs/20 secs/30 secs/ 1
min/ 3 mins/5 mins/ 10 mins
Select desire recording duration for each
time when motion trigger.
Note
:
If constant movements are detected during
motion-detect recording, the recoding will not
automatically stop even pre-set motion detect
timer is up. Another motion trigger will start if
movements is detected again
LCD Auto OFF
:
Options—ON/ OFF
ON
: LCD will automatically turn off after 2
mins after last operation to save power.
Note:
Once the LCD turn off automatically, the
RED
LED
indicator will turn steady on for notification
of this power saving mode, press any key again
to turn on the LCD screen.
OFF
: LCD will be on at all time during
recording standby mode or during video
recording; this option is useful when live
monitoring is needed.
Last Update: 20-Jul-06
23
