PRODUCT SETTINGS AND CONFIGURATION
36
OI-6000-X-X-X-X-O OPS_GUIDE_REV 3.1
3.12.2
FULL-SCALE OFFSET SETTING
1.
Use the ADD and SUB buttons to increase and decrease the full-scale offset, respectively, until the
Otis Monitor reads the full scale value for that channel.
2.
Press the MENU button to save the desired setting and to advance to the display screen contrast
setting screen.
3.13
DISPLAY SCREEN CONTRAST SETTING
The display screen contrast is the difference in luminance or color that makes the displayed images distinguishable.
Due to varying external elements, such as extreme sunlight, the brightness of the display screen may need to be
adjusted for optimum viewing.
The factory default setting on the OI-6000 for the display screen contrast is 29, approximately 45% of the contrast
scale. The contrast setting ranges from 1 to 64.
NOTICE
Setting the contrast too low will cause the display image to become faint or indistinguishable, especially when the
unit is located in areas with full-sun. The resulting field of view could be misinterpreted as an error within the
device. Be sure to verify that the selected contract is within an appropriate range of viewing.
3.
Use the ADD and SUB buttons to brighten and dim the contrast, respectively.
4.
Press the MENU button to select the desired setting and to advance to the return to factory default settings
screen.
Summary of Contents for GEN II OI-6000
Page 1: ......
Page 2: ......
Page 4: ......
Page 28: ...INSTALLATION AND STARTUP 22 OI 6000 X X X X O OPS_GUIDE_REV 3 1...
