19
8.2 safety switches/inputs
On the lift itself switches are build in to prevent driving in both directions.
One is positioned in the armrest (chair on/off).
The other switch is in the swivel seat, to prevent that movement of the lift is impossible, when the
rotating seat is not in the correct or locked position.
On/off
switch
in
armrest
Unlocking
swivel
seat
In case of a sliding rail or sensor the lift will switched off when the sliding hinge is not in the correct
position or when the sensor ‘sees’ no metal.
You can check the working of the sensor by pushing the chairlift a little backwards.
When one of the above named switches or inputs is not activated (not in on position) the LED in
armrest will be off.
By operating (1 sec.) and releasing the control left/right on the armrest we LED wil show a number of
blinks. The number of blinks refer to a specified (group of) switch(es) or inputs.
•
The Led blinks
0
times.
The keyswitch in the armrest is switched off.
(keyswitch
is
an
option)
•
The Led blinks
1
time
The armrest-switch is switched off.
(Note
On
is
switch
in
highest
position)
•
The Led blinks
2
times
The switch of the swivel seat is still
operated.
Check
the
position of the seat and
locking
handles.
•
The Led blinks
3
times
The chair is switched off because the powered
hinge is not in the correct position or that the sensor
‘sees’
no
metal.
