Otolift Stairlifts
Installation manual
64
Push switch at receiver PCB, Led will light up.
Dipswitch 9 at mainboard is OFF, remote is set
for a left handed stairlift.
Push up and down button of remote for 5 seconds,
until led receiver goes off. Led remote control will
blink as indication that teach in was succesful.
Dipswitch 9 at mainboard is ON, remote is set for
a right handed stairlift.
Repeat upper steps for each remote
(max of 10 remotes possible).
32 - Remote control - Teach in
