21
Important Notice:
1
To control cameras, you have to make sure all units share same sub-net mask and gateway
settings so that they can communicate. In addition, the first three fields of numbers in the panel’s IP
address also need to match, but have their own identifying number in the last field so they won’t
conflict with each other. This is generally the most important principle to know when working via
Ethernet.
②
Focus, exposure, gain and white balance control doesn’t work for NDI protocol, this is due to NDI
protocol limitation. You can still use PTZ control with NDI though. If you’d like to use all these controls,
please connect your cameras with N8 with RTSP protocol.
Controlling Audio
When setting up your production or during your broadcast, you will likely want to control audio levels if the
sound is too quiet or too loud. Push up and down the audio controller will increase or decrease the audio
level for the respective source. Or you may likely to have one of the channel audio never be heard or follow
channel video.
Audio Mixing
There are 2 ways to switch between audio off and AFV mode.
1
Press [MENU] button on panel, click
on the left > click audio parameter
setting 1. Each of local connections can be assigned to Disable or Audio
Follow Video.
2
Press the Audio icon
to switch between audio off or audio follow