Otonohm POWER+, Manual

18 / 24

INSTRUCTIONS FOR USE

CHARGING INSTRUCTIONS 

1)

 ge the battery fully before use:

- You can charge the battery while it is on  

  your OTONOHM generator, or remove it  

  and load it wherever you want. 

- Connect the connector (plug) of the  

  charger to the battery (socket), and then  

  connect the 230V power plug to an AC   

  outlet. You can also recharge the battery  

  with the car charger, or on one of the OTO 

  NOHM foldable solar panels equipped with

  a suitable connector. 

- Make sure the red LED is lit: it indicates that

  the charge is effective. 

- Charging stops automatically when the-  

  battery is fully charged: the LED lights up. - 

-Time for a full recharge of the battery (sub 

  ject to use of the 15V / 2A mains charger  

  or the car charger):
• Power+ 75Wh : 2h30

• Power+ 96Wh : 3h15

• Power+ 111Wh : 3h45

If the charging time takes more than 12 

hours, please contact your dealer.

2)

 Insert the battery into your OTONOHM 

current generator.

3)

 Press the ON button on the dipstick to 

check the battery charge level.

4)

 Be sure to turn off your OTONOHM ge-

nerator when not in use to conserve battery 

life.

SETTING UP

Your battery integrates a smart BMS (Intelli-

gent Management System) which can, if ne-

cessary, put the battery into standby mode, 

in order to preserve its autonomy.

- Your battery will automatically turn off af- 

  ter 5 seconds of inactivity. 

- Press the ON button on your OTONOHM  

  generator to reactivate it. 

- To force standby, press the ON button on