13
2
FOR YOUR SAFETY, PLEASE
OBSERVE THESE
WARNINGS!
PDQ Ovens are designed specifically for heating plastics for vacuum
forming and have features that make it then inappropriate for other uses.
The design is such that heating other materials may be dangerous, or
may damage the oven. Protection provided by the equipment may be
impaired if the unit is not used in a manner specified by the manufac-
turer.
Do not install or operate the PDQ Oven on or near flammable materials
or gasses. Be sure to allow sufficient ventilation around oven surfaces.
OTS Corp recommends 6” minimum.
Cleaning:
We recommend cleaning your PDQ Oven with either glass
cleaner for water based stains, or a solvent such as acetone or mineral
spirits for oil based stains. When using solvents, be sure the oven is
turned off and cool to the touch.
Moving the oven:
The PDQ Oven is light enough to be moved by 2-4
people. Let the oven cool, disconnect the electrical power and remove
the cart before moving the oven. It is always advisable to secure the
oven to the floor for permanent use.
Dangerous
Electrical
Voltage
Caution, refer to
accompanying
documents
Caution
Hot Surface
