P 10
OTS-3000 User Manual – Safety Management
1.
Do not drop and drag the HV cables , flexible tube and
electrostatic spray gun on the ground.
If the gun is drop on the ground, it will affect your
transference efficient when you are coating, otherwise,
the gun will be damage.
8.
The spraying room and the exhaustion device shall be
cleaned regularly:
If the residual paints are left in the spraying room and the
exhaustion device, then these residues may become flammable
substances in case of fire.
9. The air compressor shall be fully drained:
If the air compressor contains moisture, it may result in a poor
spraying surface. So special care should be used for draining
the moisture.
10. Please do not disassembly parts of electrostatic power
supply and gun. if you have any question , please contact
with local distributor or OTSON Technologies Corp.
KEEP DRY !
