EN-4
8800-1209 Rev B.
3. Connect LinkComm to SATLINK 3
via USB -
Run LinkComm application, and do the following for USB interface:
Select “New Station”
Select “Station type” as per the unit model
Set “Connect type” to USB; “Device” shall automatically show MAC ID of SATLINK 3
Press “Connect” to interact with the unit
via Wi-Fi -
Run LinkComm application, and do the following for USB interface:
Follow steps 3.1 and 3.2
Set “Connect type” to “Station Wi
-
Fi”;
Press “Connect” to interact with the unit ; If error “Please
connect to Station Wi-
Fi” appears, check the PC Wi
-FI
connection
3.1
3.2
3.3
3.4
