Table of contents
1 Scope of supply 5
2 Order numbers 5
3 Basic safety information 7
4 Introduction 8
5 Installing, checking, and replacing batteries 10
5.1 Power supply using lithium batteries 12
5.2 Power supply using alkaline batteries (OTT ecoLog 800) 15
6 Inserting a SIM card 17
7 If required: Connecting an external radio antenna 18
8 Installing the OTT ecoLog 800 (3G) unit 19
8.1 Installing the unit into 2" observation wells, top cap with cut-out 20
8.2 Installing the unit into 3", 4" or 6" observation wells, top cap with
cut-out for adapter plate 21
8.3 Installing the unit into observation wells of 3" in diameter and above,
top cap without cut-out for adapter plate 23
8.4 Installing the unit into observation wells of 3" in diameter and above,
without top cap, universal installation 25
9 Setting OTT ecoLog 800 (3G) operating parameters 26
9.1 Installing the OTT Water Logger Operating Program 26
9.2 Establishing the PC/OTT ecoLog 800 (3G) communication link (on site) 26
9.3 Establishing the communication link from remote (OTT ecoLog 800) 27
9.4 Setting OTT ecoLog 800 (3G) operating parameters 28
9.5 Saving/loading an OTT ecoLog 800 (3G) configuration 32
9.6 Importing/exporting an OTT ecoLog 800 (3G) configuration 32
10 Determining and displaying instantaneous values (Observer function) 34
11 Reading data 36
12 Exporting data 37
13 Displaying data 38
14 Protecting the OTT ecoLog 800 (3G) unit and the OTT Water Logger
Operating Program using a password 39
15 Setting date and time 41
16 Erasing the data memory 42
17 Updating the OTT ecoLog 800 (3G) firmware 42
18 Maintenance work 43
18.1 Cleaning the pressure probe 43
18.2 Replacing the desiccant capsules 44
18.3 Checking/replacing the batteries 45
18.4 Calibrating the conductivity sensor 45
3
Summary of Contents for ecoLog 800
Page 1: ...Operating instructions Groundwater Datalogger OTT ecoLog 800 OTT ecoLog 800 3G English...
Page 54: ......
Page 55: ......
