5
1 Scope of supply
– 1 Optical UV nitrate sensor (immersion housing),
Housing material: stainless steel;
Permanently attached connecting cable with M12-connector*, 10 metres;
Serial interface: RS-485 with Modbus transmission protocol
– 1 Connecting cable with M12-socket* and open ends; 1.5 metres
– 1 Calibration certificate
2 Order numbers and version code
OTT ecoN
UV Nirate Sensor
63.300.001.9.0
with path length (measuring range):
– 0.3 mm –.3
– 1 mm –1
– 2 mm –2
– 5 mm –5
– 10 mm –10
Accessories
Mechanical wiper
63.300.010.9.0
– For cleaning the optical path
– Without wiper shaft and wiper blades
– For mounting on the OTT ecoN housing tube
– Permanently attached connecting cable with M8-connector*; 10 metres
– Connecting cable with M8-socket* and open ends; 1.5 metres
Extension cable for OTT ecoN
M12-socket/M12-connector*
– 10 metres 63.300.018.9.0
– 25 metres 63.300.019.9.0
Extension cable for mechanical wiper
M8-socket/M8-connector*
– 10 metres 63.300.016.9.0
– 25 metres 63.300.017.9.0
Connecting cable with open ends
for OTT ecoN
63.300.035.9.0
with M12-socket*; 1.5 metres
Connecting cable with open ends
for mechanical wiper
63.300.036.9.0
with M8-socket*; 1.5 metres
Fastening clips for OTT ecoN
63.300.031.9.0
66 mm x 86 mm; black; including mounting accessories
Float for OTT ecoN
63.300.030.9.0
for horizontal installation in surface waters with
fluctuating water level (alternative to fixed,
suspended vertical installation)
* The M12/M8 connectors are not pressure water tight
➝
not suitable for use under water!
Protection: IP67
OTT ecoN
