18
7 Adjusting the OTT Orpheus Mini operating
parameters
To adjust the OTT Orpheus Mini operating parameters, you will need the
"OTT Orpheus Mini operating program" (WBSPL0.exe) PC software. This software
is contained on the "OTT Orpheus Mini software" CD-ROM (accessory).
Hardware and software requirements: see CD insert.
7.1 Installing the OTT Orpheus Mini operating program
Install the OTT Orpheus Mini operating program as follows
Insert the OTT Orpheus Mini software CD-ROM into the drive of the PC.
Start the "setup.exe" file in the "\Software\English"
1)
directory (e.g. double
click on the file symbol)
➝
the Setup Assistant opens and guides you through
the installation.
Follow the installation instructions on the screen.
1)
Alternatively: "\Deutsch" or "\Français" or "\Español"
7.2 Setting up the PC/OTT Orpheus Mini communication link
In the following chapters, establishing a communication connection between the
OTT Orpheus Mini and a PC is a pre-requisite for the subsequent steps. The follow-
ing description illustrates the various methods of setting up this communication link.
The communication between the OTT Orpheus Mini and a PC is established wire-
lessly using invisible infrared light (IrDA interface).
Required accessories:
OTT Duolink reading head
1)
or
OTT IrDA-Link USB reading head
1)
with PCB version "b": see label on the connection line
Note
Together with a modem and the OTT ITC intelligent top cap, it is possible to
establish a remote communication connection. See online help for the OTT
Orpheus Mini operating program.
How to establish a communication link
Start the OTT Orpheus Mini operating program.
Change the language for the OTT Orpheus Mini operating program as
required: press function key "F3" (multiple times) until the required language
appears.
In the start window, press the "Setup device" button
➝
the operating program
displays the "Basic operation" window. No operating parameters for the OTT
Orpheus Mini are visible yet.
– Setting up a communication link with the OTT Duolink reading head:
Connect the OTT Duolink reading head to a serial PC port (COM1, etc.).
Direct the OTT DuoLink reading head at the OTT Orpheus Mini infrared
interface (see Fig. 12).
In the OTT Orpheus Mini operating program, select the communication path
"IrDA – OTT DuoLink" and the serial port used (COM1, ...).
Summary of Contents for Orpheus Mini
