Page 2
Tools Required:
Ratchet & 7/16” socket
7/16” Wrench
Drill
5/16” Drill Bit
7/16” Drill Bit
Item 19 - 5/16 Washer
Item 26 - 1/4 Nylon Hex Lock Nut
5. Bolt frame brackets (Item 3 and Item 4) to sled using holes predrilled in Step 3.
6. Use appropriate fasteners as shown.
3
19
26
4
1. Lay out all parts.
2. Position sled (Item 1) as shown with
curved front to your left.
3. Tip the sled on its side and drill the 4
marked holes using a 5/16” drill bit.
4. Using the premarked holes, drill the
7/16” holes in center of lip near the
bend in sled. The back adjustable
poles (Item 5 not shown) are to be
propped here.
Drill 4 premarked holes
with 5/16” drill bit.
1
7/16 in.
holes
