2
ENGLISH
Never use this unit near bathtubs, showers, basins or other vessels containing water.
Use of an extension cord with this appliance is not recommended. However, if it is necessary to use
an extension lead, ensure that the lead is suited to the power consumption of the appliance to avoid
overheating of the extension cord, appliance or plug point. Do not place the extension cord in a
position where it can be pulled on by children or animals or tripped over.
This appliance is not suitable for outdoor use. Do not use this appliance for anything other than its
intended use.
Do not leave this appliance unattended during use. Always unplug the unit when not in use. Allow it
to cool before cleaning the appliance.
Iron only on an ironing board.
Always operate the appliance on a smooth, even and stable surface. Do not place the unit on a hot
surface.
The manufacturer does not accept responsibility for any damage or injury caused by the improper or
incorrect use of the appliance, or by repairs carried out by unauthorized personnel.
In case of technical problems, switch off the machine and do not attempt to repair it yourself. Return
the appliance to an authorized service facility for examination, adjustment or repair. Always insist on
the use of original spare parts.
Failure to comply with the above mentioned precautions and
instructions, could affect the safe operation of this machine.
Never pull the cord while disconnecting from the power outlet; instead, grasp the plug only and pull to
disconnect.
Do not allow the cord to touch sharp edges and hot surfaces.
When you have finished ironing or when you are leaving the iron unattended:
a.
Turn the steam control knob to “
” position and turn the Temperature Control to “OFF”.
b.
Stand the iron upright.
c.
Disconnect the iron from the wall outlet.
Do not touch hot metal parts, hot water or steam. These parts become hot and may cause burns.
Take care if you turn the iron upside down. There may be hot water in the tank.
The plug and cord should not be allowed to touch the hot soleplate. Allow the iron to cool before
taking it away.
The plug must be removed from the socket-outlet before the water reservoir filled with water.
The filling aperture must not be opened during use. Instructions for the safe refilling of the water
reservoir shall be given.
The iron must be used and rested on a stable surface.
When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
CAUTION:
To avoid circuit overload, do not operate another high wattage appliance on the same
circuit.
