6
NOTE:
To prevent water leakage from the soleplate, do not keep the powerful steam button pressed for
more than 5 seconds.
WHEN YOU FINISHED IRONING
a.
Set the temperature dial to the OFF position.
b.
Remove the main plug from the wall socket.
c.
Stand the iron on heel rest.
SELF-CLEANING FUNCTION
1.
This function removes the scales and minerals built up in the Steam Chamber. The iron will remain
in the best condition if this function is performed at least once a month or more regularly depending
on the hardness of the water used.
2.
Fill the water tank up to half and stand the iron upright.
Caution
：
Keep skin/body away from the hot surfaces.
3.
Plug into the power supply.
4.
Set the temperature control at the “
●●●
”(3 dots) position. Indicator light will light up indicating the
iron is switched on.
5.
Indicator light switches off when the required temperature is reached.
6.
Hold the iron horizontally over a sink.
7.
Push the steam control knob to the self-clean “
” position and hold on it until boiling water, steam,
impurities come out from the holes of soleplate.
8.
Disconnect the iron from the electric outlet.
9.
When self-cleaning is completed, switch the steam control to "
" position and turn the temperature
control to “OFF” position. Turn the Iron upside down and allow water to drain out.
CARE AND CLEANING
1.
Turn the temperature control to “OFF”, then disconnect the iron from the wall outlet and let it cool
down completely.
2.
Deposits and other residues on the soleplate can be removed with a cloth soaked in a diluted
vinegar/water solution.
3.
To clean the exterior of your iron, wipe with a damp soft cloth and wipe dry.
4.
Do not use scouring pads, abrasives or harsh cleaners to clean the soleplate.
5.
Keep the soleplate smooth, do not iron over sharp objects such as buttons, studs, and zippers.
ENGLISH
