background image

CONGRATULATIONS!

You’ve purchased the finest in natural lighting technology 

with your new OttLite

®

 product.

PRODUCT REGISTRATION FORM

Please complete the enclosed Product Registration Form 

and return it today by mail, or register online by going to:  

OttLite.com/warranty.

WARNING!

 

To prevent electrical shock, make sure the lamp 

is not plugged in until all assembly steps are complete.

LAMP ASSEMbLy

1. 

Remove lamp and accessories from packing and place 

them on a flat steady surface (a table).

2. 

To attach the 18w  Easel Lamp to your easel, position the 

clamp 

(A)

 on a solid leg or brace of the easel, then turn 

knob 

(G)

. Adjust movable clamp jaw 

(H)

 as needed.  

See 

Figure 2

.

3. 

For additional clamp support and security, push lever 

(J)

 downward. 

NOTE:

 Be sure to release lever prior to 

loosening the clamp. See 

Figure 3

.

4. 

Insert pole base 

(C)

 into hole in clamp 

(A)

 as noted in  

Figure 1

.  Make sure the pole base is flush with the clamp. 

NOTE:

 In addition to flexing neck for light movement, 

lamp can be easily removed and re-inserted into clamp 

(A)

 at a different position.

5. 

Set the lamp upright and follow 

TUBE INSERTION/ 

REPLACMENT

 directions to insert the tube.

6. 

Plug the power cord into a standard 120v socket.

7. 

To turn the lamp 

ON

 or 

OFF

, depress the pushbutton 

switch 

(F)

. See 

Figure 4

.

8. 

Position shade 

(D)

 as desired by flexing the neck 

(B)

.  

To avoid lamp breakage 

DO NOT FORCE

 neck to bend 

or twist.

9. 

See 

Figures 5, 6, and 7

 for recommended placement of 

18w Easel Lamp. 

DO NOT

 position the 18w Easel Lamp 

horizontally as shown in 

Figure 8

.

TUbE INSERTION & REPLACEMENT

1. 

Make sure the lamp is not plugged into an electrical 

socket.

2. 

If the lamp has been in use, allow it to cool for 

approximately 5 minutes before proceeding.

3. 

Set the lamp upright on the easel.

4. 

To install a tube 

(E)

 in the shade 

(D)

 socket, grasp the 

tube securely with your hand.  Lay the tube flat then push 

the tube into the shade clip.  Align the tube base and 

pins with the socket and receptacles and push the tube 

straight into the socket until it “snaps” into place.   

DO NOT

 apply pressure on the glass end of the tube.

5. 

To remove a tube already installed in the lamp, grasp 

the tube firmly in your hand and angle it slightly out of 

the shade clip; using a slight side to side motion, pull it 

straight out of the socket. Do not twist or turn the tube 

while removing it from the socket.

Enjoy your OttLite 18w Easel Lamp!

Please note that in operation, OttLite tubes are not 

dimmable.

This lighting system is designed for use with OttLite

®

 

type   tubes (Style Number PL18-B). Use of other 
products voids the warranty and may result in damage 
to the lighting system.

CAUTION! IMPORTANT SAFETY INSTRUCTIONS:

THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE RISK OF ELECTRIC 

SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE 

PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY 

INSERTED. DO NOT ALTER THE PLUG.
IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE 

MANUFACTURER OR ITS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

This product complies with Part 18 of FCC Rules, but may cause interference to radios, televisions, wireless telephones, and remote controls. 

Avoid placing this product near these devices. If interference occurs, move the product away from the device or plug either into a different 

outlet. Do not install this product near maritime safety equipment or other critical navigation or communication equipment operating between 

0.45-30 MHz.

This Class B RFLD complies with Canadian ICES-005

INS-14-0122        

 REV071814

English                                                                                              

18w Easel Lamp

18w Easel Lamp

C75002 

     

 

ACDL126

Figure 2 / Figura 2

G

H

J

Figure 3 / Figura 3

H

A

C

D

E

B

Figure 1 / Figura 1

Figure 4 / Figura 4

F

Figure 5 / Figura 5

Figure 6 / Figura 6

Figure 7 / Figura 7

Figure 8 / Figura 8

Reviews: