Alarm Setting
(continued)
4. Once the sound has been selected, press push button again to
select your Wake Up Your Way profile. You have 3 options to choose
from, use the
<
and
>
push buttons to make your selection:
•
Option 1
- Sound and Light
•
Option 2
- Sound only
•
Option 3
- Light only
5. Once your Wake Up Your Way profile has been selected, press push
button again to select your light cycle. You have 3 options to choose
from, use the
<
and
>
push buttons to make your selection:
•
10 minute cycle
•
20 minute cycle
•
30 minute cycle
Note:
Light cycle will start at lowest light intensity and will continue to
increase gradually until it reaches full intensity at set alarm time.
Example:
If alarm time is set for 7:00
a.m.
, and 10 minute cycle has been
selected, the light cycle will start at 6:50
a.m.
and finish at 7:00
a.m
.
6. To complete Alarm setting, either press push button again or after
10 seconds of no action, the unit will exit out of alarm setting mode
with settings saved.
Note:
If using Natural Daylight feature for alarm setting, you will need to
manually turn off the light by pressing touch button. Pressing the
push
button will not turn the light feature off.
