Service work
490E75=0_C
50 | Ottobock
93
94
4.9.2.6 Replacing the anti-tipper wheel
f
Prerequisites:
Optional: Move the seat to the lowest seat height (see Page 15).
Switch off the control unit and deactivate the main fuse (see Page 15).
If necessary: Remove the legrests.
f
Tools: Allen wrench size 5; torque wrench with Allen insert size 5; open-ended or ring wrench size 13
Removing the anti-tipper wheel
1) Loosen and remove the screw and nut on the anti-tipper wheel (see Fig. 95).
2) Remove the anti-tipper wheel with 1 adjusting washer from the anti-tipper bracket.
Installing the anti-tipper wheel
1) Position the anti-tipper wheel with 1 adjusting washer on the anti-tipper bracket.
2) IN@MOOC@N>M@R<I?IPODIOJOC@<IOD}ODKK@MRC@@G<I?uMHGTODBCO@IDON@@DB{ÆÂ{
95
4.9.2.7 Replacing the anti-tipper
f
Prerequisites:
Optional: Move the seat to the lowest seat height (see Page 15).
Switch off the control unit and deactivate the main fuse (see Page 15).
If necessary: Remove the legrests.
Jack up the wheelchair (see Page 14).
f
Tools: Allen wrench size 5; torque wrench with Allen insert size 5; open-ended or ring wrench size 13
Removing the anti-tipper
1) Remove the drive wheel (see Page 45).
2) Remove the drive wheel suspension (see Page 46).
3) Loosen and remove the 2 screws and nuts on the anti-tipper (see Fig. 96, item 1).
4) Remove the anti-tipper from the drive wheel swing arm.
Summary of Contents for 490E75 Series
