Service work
490E75=0_C
Ottobock | 71
4.11 Changing tyres
CAUTION
Improper tyre replacement
Injuries to the user due to incorrect installation, product damage
f
No person is permitted to sit in the wheelchair during tyre replacement.
f
Before removing a wheel, support the product so it cannot tip over.
f
Always replace the tyres in pairs. Two differently worn tyres affect the directional stability of the wheelchair.
f
Prerequisites:
Optional: Move the seat to the lowest seat height (see Page 15).
Switch off the control unit and deactivate the main fuse (see Page 15).
If necessary: Remove the legrests.
Jack up the wheelchair (see Page 14).
f
Tools: Allen wrench size 5, 6; torque wrench with Allen insert size 5, 6; Optional: Plastic tyre mounting levers;
inner tube repair kit
Removing the tyres
1) Remove the wheel (see Page 45/Page 57).
2) Optional for pneumatic tyres: Let all the air out of the tyre.
3) Loosen and remove the 5 screws on the inside of the rim (see Fig. 143/144/145).
4) Separate the 2 pieces of the rim (see Fig. 146).
5) Remove the tyre from the rim and replace if necessary.
6) Optional for pneumatic tyres: Pull the inner tube out of the casing and repair or replace if necessary.
Installing the tyres
1) Optional for pneumatic tyres:Iv<O@OC@DII@MOP=@NGDBCOGT<I?DIN@MODODIOJOC@><NDIB{
2) Pull the tyre onto the rim. Optional for pneumatic tyres: Insert the valve of the inner tube into the notch in the
rim (see Fig. 143, item 1).
3) Join the 2 pieces of the rim. Precisely align the notches for the valve one on top of the other (see Fig. 143, item 1).
4) IN@MOOC@ÂN>M@RNJIOC@DIND?@JAOC@MDH<I?uMHGTODBCO@IOC@HDI<>MJNNRDN@N@LP@I>@N@@DB{¾ÁÀ¾ÁÁ/145).
5) Attach the wheel (see Page 45//Page 57).
143
144
145
146
Summary of Contents for 490E75 Series
