Replacement and disassembly
The set position of the prosthetic component can be maintained dur
ing replacement or disassembly. In order to do this, unscrew the two
set screws that are screwed in the furthest and located next to each
other.
6 Maintenance
►
A visual inspection and functional test of the prosthetic compon
ents should be performed after the first 30 days of use.
►
Inspect the entire prosthesis for wear during normal consulta
tions.
►
Conduct annual safety inspections.
7 Disposal
In some jurisdictions it is not permissible to dispose of the product
with unsorted household waste. Improper disposal can be harmful to
health and the environment. Observe the information provided by the
responsible authorities in your country regarding return, collection
and disposal procedures.
8 Legal information
All legal conditions are subject to the respective national laws of the
country of use and may vary accordingly.
8.1 Liability
The manufacturer will only assume liability if the product is used in
accordance with the descriptions and instructions provided in this
document. The manufacturer will not assume liability for damage
caused by disregarding the information in this document, particularly
due to improper use or unauthorised modification of the product.
8.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745
on
medical devices. The CE declaration of conformity can be down
loaded from the manufacturer's website.
9
8.3 Warranty
The manufacturer warrants this device from the date of purchase. The
warranty covers defects that can be proven to be a direct result of
flaws in the material, production or construction and that are reported
to the manufacturer within the warranty period.
Further information on the warranty terms and conditions can be
obtained from the competent manufacturer distribution company.
9 Technical data
Reference number
6A53
6A54
Weight [g]
180
System height [mm]
-16
33
Material
Aluminium
Max. displacement [mm]
20
Max. body weight [kg]
125
1 Description du produit
Français
INFORMATION
Date de la dernière mise à jour : 2020-07-01
►
Veuillez lire attentivement l’intégralité de ce document avant
d’utiliser le produit ainsi que respecter les consignes de sécuri
té.
►
Apprenez à l’utilisateur comment utiliser son produit en toute sé
curité.
►
Adressez-vous au fabricant si vous avez des questions concer
nant le produit ou en cas de problèmes.
►
Signalez tout incident grave survenu en rapport avec le produit,
notamment une aggravation de l’état de santé, au fabricant et à
l’autorité compétente de votre pays.
►
Conservez ce document.
Summary of Contents for 6A53
