101
102
3.10.2.2 Replacing the Side Panel Mounting
1) Remove the desk side panel (see fig. 103).
2) Unscrew the size 3 Allen head screw (see fig. 104).
3) Remove/replace the side panel mounting.
4) To reassemble, perform these steps in reverse order. Tighten the Allen head screw to
5 Nm
.
103
104
3.10.2.3 Replacing the Seat Tube Support
For the replacement Replacing the Seat Tube Supports.
3.10.2.4 Replacing the Retaining Clip
1) Remove the desk side panel.
2) Unscrew the size 5 Allen head screw on the retaining clip (see fig. 105).
3) Replace/position/bolt down the retaining clip.
105
106
3.10.2.5 Replacing the Pivot Pin
1) Remove the side panel.
2) Unscrew the 2 Phillips head screws on the pivot pin (see fig. 106).
32
Service Work
Avantgarde CV / CS / CLT
Summary of Contents for Avantgarde CLT
Page 1: ...Service manual Avantgarde CV CS CLT...
Page 61: ...61 Avantgarde CV CS CLT...
Page 62: ...Avantgarde CV CS CLT 62...
