03/2010
B500 | B500-S
Page 101
Delivery and Putting into Operation
nOTE !
If your power wheelchair is not moved for sev-
eral days, permanent colour changes might
result on the ground where the wheelchair
comes into contact with it. For this reason,
place a suitable mat underneath the wheel-
chair, if it is not going to be used over an ex-
tended period of time.
nOTE !
Black tyres can leave black traces on the
ground under some circumstances. For this
reason, we recommend choosing grey tyres
when using the power wheelchair mainly in-
doors.
nOTE !
Remove the fuse for shipping or when the
power wheelchair is not being used for an ex-
tended period of time.
The power wheelchair must be stored in a dry place.
For transport and storage, an ambient temperature
range from -40 °C to +65 °C must be observed.
6
Delivery and
Putting into Operation
6.1 Delivery
Delivery includes:
r
Adapted power wheelchair with main components
(see fig. 3)
r
Battery charger
r
Operating instructions
r
Options (see section 8)
nOTE !
The options included in the delivery depend
on the product configuration that has been se-
lected for the power wheelchair.
Upon delivery by the specialist dealer the power wheel-
chair is ready for use. All the settings correspond to the
indications on the order form or are adjusted directly on
site by the dealer. The power wheelchair is adapted to
the personal requirements of the individual.
The functions of the individual components can be tested
by following the instructions in section 7. Possible mal-
functions are described in section 9.
