03/2010
B500 | B500-S
Page 116
Operation
Electric back angle adjustment:
When the joystick is
deflected ahead or back, the back rest moves ahead or
back accordingly.
Electric seat tilt:
Deflecting the joystick to the rear will
electrically tilt the seat to the rear. Deflecting the joystick
to the front tilts the seat ahead until it is level (factory set-
ting; can be adapted by the specialist dealer).
Lift seat (only for B500-S available):
Deflecting the joy-
stick ahead or back raises or lowers the electric lift seat.
As soon as the lift seat leaves the lowest position, the
speed is reduced (creep speed) because the power
wheelchair is less tip-resistant. This is indicated by a snail
symbol on the control panel LCD monitor. (see Figure
24).
Electric footrests:
Deflecting the joystick ahead or back
raises or lowers the electric footrests.
coupled seat adjustment:
Deflecting the joystick ahead
or back moves the back rest and seat forward and down
or back and up simultaneously.
You can switch back to driving mode by pressing the “M”
button.
Display symbol(s)
Information
Electric
back angle adjustment
Lift seat
(with B500-S only)
Electric seat tilt
If the lift seat and electric
footrests are ordered
together, this symbol is
used for the lift seat.
Electric footrests
Coupled electric back
angle adjustment and
seat tilt
Table 4 Display of electric seat functions
on the control panel
