4 Delivery
4.1 Scope of supply
The power wheelchair is normally shipped fully assembled
and fitted to the personal requirements of the respective
user.
The scope of delivery includes:
•
Fitted power wheelchair with main components
•
Installed options
•
Battery charger
•
Instructions for Use (user)
4.2 Options
The standard model can be fitted to the user's personal
requirements through a large range of options.
A full list of the available modules and accessories is shown
on the order form and in the accessories catalogue.
To use options: see Page 18 et. seq.
4.3 Storage
4.3.1 During daily use
The power wheelchair should always be protected against
external influences.
The control unit must be turned off.
4.3.2 In case of extended disuse
NOTICE
Deep discharge due to standby current
Risk of battery damage
►
Remove the fuse if the wheelchair is not used for more
than 3 days.
INFORMATION
To remove the fuse, see section "Repair" > "Replacing a
defective fuse".
Please observe the following if the power wheelchair is not
used for more than
3 days
:
Storage conditions
•
Maintain an ambient temperature between
-40 °C and
+65 °C
and a relative humidity between
45 % and 85 %
.
•
Store the power wheelchair in a dry, enclosed room with
sufficient air circulation and protection from external
influences.
•
Protect the wheels against ground frost, e.g., by reliev
ing them completely through assembly blocks or
wooden boards.
•
Fill the wheels with slight overpressure and rotate them
at regular weekly intervals to prevent flat tyres from
extended standing.
12 | Ottobock
B400
Delivery
Summary of Contents for B400b400
Page 1: ...Instructions for Use User B400...
Page 2: ......
