The relevant product must be thoroughly cleaned and disinfected before re-use. Then have the product inspected
by qualified personnel with respect to its condition, wear and tear, and damage. Worn and damaged parts as well
as components that do not fit or are unsuitable for the user must be replaced.
Detailed information on replacing components as well as information on the required tools can be found in the ser
vice manual.
11 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary accordingly.
11.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc
tions provided in this document. The manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthorised modification of the product.
11.2 Warranty
Further information on the warranty terms and conditions can be obtained from the qualified personnel that has fit
ted this product or the manufacturer's service (see inside back cover for addresses).
11.3 Service life
Expected lifetime:
4 years
The design, manufacturing and requirements for the intended use of the product are based on the expected life
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.
12 Technical data
INFORMATION
►
Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe
cified – cannot be adjusted in the mm range but only in increments of approx.
0.5 cm
or
1 cm
.
►
Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be
±10 mm and ±2°
.
Dimensions and weights
Model 2231 / 2241
Model 2233 / 2243
Length
[mm]
620–780
620–780
Width
[mm]
450
450
Height to upper edge of seat adapter*
[mm]
380–580
410–620
Seat adapter tilt
[°]
-10 to +35
-10 to +35
Max. load
[kg]
50
50
Weight
[kg]
6.4 / 6.6
6.4 / 6.6
* for 125 mm wheel diameter: +70 mm
Ambient conditions
Temperatures and relative humidity
Temperature during use [°C (°F)]
-10 to +40 (14 to 104)
Transport and storage temperature [°C (°F)]
-10 to +40 (14 to 104)
Relative humidity [%]
10 to 85; non-condensing
32
Legal information
HR2233=0000_K
Summary of Contents for HR2233 0000 K
