10
CAUTION
Insufficient distance to HF communication devices (e.g. mobile phones, Bluetooth
devices, WiFi devices)
Injury due to unexpected behaviour of the product caused by interference with internal data
communication.
►
Therefore, keeping a minimum distance of 30 cm from HF communication devices is recom
mended.
CAUTION
Operating the product in very close proximity to other electronic devices
Injury due to unexpected behaviour of the product caused by interference with internal data
communication.
►
Do not operate the product in the immediate vicinity of other electronic devices.
►
Do not stack the product with other electronic devices during operation.
►
If simultaneous operation cannot be avoided, monitor the product and verify proper use in
the existing setup.
CAUTION
Improper securing of the electrode domes
Injury due to product malfunction.
►
Do not use thread locking compound (Loctite) to secure the electrode domes. Applying
thread locking compound forms an insulating layer that prevents transmission of the EMG
signals.
NOTICE
Failure to observe the system requirements for the installation of the Myo Plus app
Malfunction of the device.
►
Install the Myo Plus app only on the operating systems listed in the section "System require
ments" (see page 14). The tested devices are listed in this section as well.
NOTICE
Mechanical damage to the product
Change in or loss of functionality due to damage.
►
Use caution when working with the product.
►
If the product is damaged, check it for proper function and readiness for use.
►
Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
customer service, etc.).
5 Scope of Delivery and Accessories
Scope of Delivery
Items in the scope of delivery or accessories marked with
▀
are application parts according to the
IEC 60601-1:2005/A1:2012 standard.
•
1 pc. 13E520 Myo Plus TR
•
1 pc. 646C107 Bluetooth PIN card
•
1 pc. lug wrench
•
1 pc. lamination dummy for Myo Plus TR
•
1 pc. positioning gauge for O&P professional 623F50
•
3 pc. 13Z164 cable marking
