26
27
6.8.3 Adjusting the posterior lower leg pad of the "elevating" leg support
The posterior lower leg pad on this leg support is height-adjustable.
1) Loosen the clamping unit mounting screw (see fig. 28).
2) Slide the posterior lower leg pad to the desired height.
3) Re-tighten the mounting screw.
28
6.8.4 Adjusting the amputation leg support
Adjusting the support angle of the amputation leg support
The angle adjustment is carried out in the same way as for the “elevating” leg support. For additional information,
see the instructions for use (user).
Adjusting the pad
1) Pad angle: Loosen the three Allen head screws and turn the posterior lower leg pad to the desired angle (see
fig. 29). Firmly re-tighten the Allen head screws.
2) Pad height: Loosen the Allen head screws on the clamp bracket and adjust the height (see fig. 30). Firmly re-
tighten the Allen head screws.
19
Start M4 XXL, Start M6 Junior
Settings
