Ottobock | 11
Z-Flo 476C00=Z*
3 Technical Data
3.1 Available Sizes
The seat cushion will be adapted to the correct size in accordance with the order:
Z-Flo seat cushion
Dimensions
seat width x
seat depth
� � 476C00=AC15x16
38x40
� � 476C00=AC16x16
40x40
� � 476C00=AC16x18
40x46
� � 476C00=AC16,5x16,5
42x42
� � 476C00=AC18x16
46x40
� � 476C00=AC18x16,5
46x42
� � 476C00=AC18x18
46x46
� � 476C00=AC20x18
50x46
3.2 Basic Data
Seat cushion
thickness*
Weight*
Permissible
patient weight
Reference size*
Z-Flo
7 cm
1.6 kg
(with 40 x 40 cm/
6 x 16 inches)
125 kg
40 x 40 cm
(16 x 16 inches)
Structure of the seat cushions
Foam with air chamber: polyurethane
Floam cells: Floam (mineral oil, Kraton, acrylic)
Cover: synthetic rubber; decor fabric, black
* ready-to-use state
4 Liability
The manufacturer’s warranty applies only if the device has been used under the conditions and for
the purposes described. The manufacturer recommends that the device be used and maintained
according to the instructions for use.
The manufacturer is not responsible for damages caused by components and spare parts not
approved by the manufacturer. Repairs must be carried out exclusively by authorised dealers or
by the manufacturer.
5 CE Conformity
This device meets the requirements of the 93 / 42 / EEC guidelines for medical devices. This
device has been classified as a class I device according to the classification criteria outlined in
appendix IX of the guidelines. The declaration of conformity was therefore created by Ottobock
with sole responsibility according to appendix VII of the guidelines.
