Copyright © 2014. All rights reserved.
R201406-V12
Installation Instructions:
1. Remove splice compartment cover from fitter.
2. Route supply leads through fitter and into splice compartment.
3. Slip lower fitter over pipe or tenon and securely tighten both set screws with 5/32 allen wrench to 140 in. lbs.
4. Complete the wiring to the power source and ground (refer to Fixture Wiring) inside splice compartment.
5. TO AIM FIXTURE: With splice compartment cover removed, loosen fitter bolt.
6. Adjust fixture to desired angle.
7. Retighten fitter bolt ensuring that the upper and lower fitters are engaged. Tighten fitter bolt to 230 in. lbs. with a torque
wrench.
8. Replace splice compartment cover.
Fixture Wiring:
1. Using customer supplied 90°C minimum rated wire connectors, make the following electrical connections:
a. Connect the black fixture lead to the voltagesupply lead
b. Connec t the white fixture lead to the neutral supply lead
c. Connect the green or green/yellow ground lead to the supply ground lead.
Model
EHL6S11K
Input Voltage
Universal 120V ~ 277V
Delivered Lumen Output
11,500 Lumens
Beam Angle / Photometric Distribution
20° Spot
CCT
5000K
Color Rendition
70 CRI
Lifetime (L
70
at 15°C)
50,000 Hours
Housing Material
Die-cast aluminum housing and lens frame
Finish
Dark-bronze polyester powder-coat finish
Minimum Starting Temperature
-40°F
Dimensions
17" H x 15-7/8" W x 6-3/4" D (Height dimension includes fitter)
Weight
19.5 lbs
Comparable To
400W MH
*Specifications and appearance are subject to change without notice.
MADE IN CHINA
