- On the floor of an empty room (under construction or major renovations),
draw the location of stationary elements (toilet, bath, shower, counters,
drawers, permanent furnishings) that will be installed later. These marks will
outline the heating area to ensure the
Therma Cable
system is not placed
under these stationary elements.
- The floor temperature sensor must be centered between two parallel heating
cables. The ideal location is one where it is likely to be away from stationary
objects and sheltered from outside influences (sunlight) that could skew floor
temperature readings. For maximum comfort, the area above the sensor must
be free of obstruction.
4.4 Installing the Therma Cable Floor Heating System
14
Fig. 4.3 b
Fig. 4.4 a
heating cable
junction
channel
cold lead
Summary of Contents for Therma Cable
Page 1: ...INSTALLATION GUIDE October 2009 Edition...
Page 2: ......
