OUMAN EH-203
SETTINGS
OUMAN EH-203
Press the
button to move the cursor to "Settings". Press
OK
.
Press the
button to move the cursor to the setting whose value you
want to change. Press
Press the
or
button to change the setting. Press
OK
OK
.
+
.
-
Press the
button to move to the HW regulating circuit
Explanation:
The length of the outdoor temperature
measurement follow-up period from
which the regulator calculates the
average. Supply water regulation and
pump control occur on the basis of the
measurement of the average.
The duration of the automatic pre-
increase after the reduced operation
mode.
Domestic hot water alarm limit.
Domestic hot water increase (anti-
bacteria function).
Range:
0...20h
0...20h
0...5h
0...5h
65...120°C
0...25°C
Factory
settings:
2 h
0 h
70 °C
H1:
H2:
H1:
H2:
0 h
0 h
0 °C
Settings:
OutdoorDelay
Pre-increase
HW alarm
HW increase
Attention!
The alarm limit automatically
rises during an increase in
HW.
HW
is set in
clock functions (see p. 14).
increase time
INFORMATION ABOUT MAINTENANCE MODE SETTINGS:
HW Settings
HW alarm
°C
HW increase
°C
70
0
Directions for entering the
maintenance mode are on page 21.
H1 Settings
OutdoorDelay
h
Pre-increase
h
2
0
H1 Maint mode
Tuning values
Settings
Trends
Ouman EH-203 has three types of settings:
a)
which the user can adjust (p. 6-7)
b)
which the maintenance person may have
to adjust
c)
which seldom have to be adjusted
(p. 29)
The original factory settings are restored in special maintenance (p. 28)
user level settings
maintenance mode settings
special maintenance mode settings
Press the
button to move the cursor to the setting whose value you
want to change. Press
Press the
or
button to change the setting. Press
OK.
OK
.
+
-
23
