Last Update: 2011-June INSTRUCTION MANUAL FOR THERMOSYPHONIC SYSTEMS
24/35
©TANSUG MAKİNA LTD. 2008
6.5.7
Remove the tiles on the roof and identify the location on the wooden, steel
or concrete beams on which it is possible to screw the
roof anchors (J)
. Install the roof
anchors on the suitable locations alongside the beams. Try to locate the anchors in a way
that one pair is at the bottom and the other two pairs are closer to the top.
6.5.8
Put the structure aside and drill the holes on the roof and insert plugs and nuts. Anchor
the roof supports (I) on the roof.
6.5.9
Move the structure on top of the ground supports (D) Install the ground supports on each
four points of the structure that touch the ground.
6.5.10
After you have placed the panels on the stand, install the
panel grips
.
(H)
6.5.11
Put the tank on the support beds and screw the tank wind belt from the back of the
structure.
