background image

19

OPeRAtIOn

During making coffee, you can adjust the volume of coffee by rotating the 
rotary button.
Default volume of espresso: 150ML

When the screen indicates as the top picture, it means the long coffee is 
ready, please enjoy it.

1

1

4

2

2

3

3

3

3

4

4

4

hOt Water

Hot water can be adjusted to three temperature level, which are 
high temperature, medium temperature and low temperature.

touch the Hot water icon for hot water function.
Default temperature level of the hot water: normal temperature.

When the hot water is at the medium grade, you can adjust the hot water to 
high temperature by rotating the rotary button to the right side.

When the hot water is at the normal level, you can adjust the hot water to 
low temperature by rotating the rotary button to the left side.

During making hot water, you can adjust the volume of hot water by rotating 
the rotary button.
Default volume of hot water: 200ML

caPPuccInO

• 

When making cappuccino, steam will erupt from the spout, 
please be careful to avoid being scalded.

• 

When making cappuccino, coffee latte, hot milk and milk foam, 
please ensure the milk frother has been set up in the machine 
and connected to the milk pipe; please insert the milk pipe into 
the milk before making.

• 

It will achieve the best foam quality if the milk temperature is 
below 10°C.

• 

One electric rapid heater controls the steam separately, and 
it needs to be heated under energy saving mode, and this 
process cannot be skipped.

1

5

2

3

4

touch the Cappuccino icon for cappuccino function.

Produce the temperature is not high enough to produce steam, the elec-
tric rapid heater will begin to heat.

Press the rotary button, the grinder will begin to grind. At this time, you 
can adjust the amount of coffee beans by rotating the rotary button.
Default amount of coffee beans for cappuccino:

When the screen indicates as the top picture, it means the heating 
process is completed.

When the screen indicates as the left picture, it begins to make hot milk 
foam.

1

5

2

3

4

enG

Summary of Contents for AM6240/DC














































Reviews: