background image

Welcome and thank you for purchasing the H8CF101 conversion kit.  I know you are looking forward 

to flying an advanced racing drone that can be customized and can deliver efficient air flow, a strong 

frame, and fantastic flying capabilities. In this manual you will find the instructions that will take you 

step by step to comple your drone and to start flying! 

As you are working through the instructions it is important that you READ THE DIRECTIONS! There 

are fine points covered that you will miss if you only assemble by the pictures. You will enjoy your 

journey much more if you follow the instructions provided in this manual. 

As always, we are dedicated to your drone flying experience and if you have thoughts, suggestions, 

concerns, or want to share a happy flight, please feel free to contact us! 

outoftheboxinnovations@gmail.com

DISCLAIMER: 

Out of the Box Innovations RC can not forsee the equipment you will purchase or how you will use 

the product when you recieve it. We are not responsible for any injuries or property damage to any

-

one or anything as it relates to this product. USE AT YOUR OWN RISK!

Summary of Contents for H8CF101







Reviews: