- 8 -
ASSEMBLY PROCEDURES
Hardware Used
HH
2. Assemble the tank housing.
Secure the tank housing to the base using
4pcs screw M5X10.
x 1
Philips
screwdriver
DD
x 4
Screw M5X10
2
1
F
DD
Hardware Used
1. To protect heater from strong wind, anchor
the base securely to the ground with screws.
Reverse the base, fix the ground fixer to the
base with bolt M6X10 and washer
Φ
6 like
picture shows. Secure the ground fixer with
nut M6 Fix another two ground fixer with
bolts and nuts, and reverse the base.
BB
x 6
Washer
Φ
6
EE
x 3
Ground Fixer
FF
x 6
Bolt M6X10
GG
x 6
Nut M6
II
x 1
Wrench
FF
EE
BB
GG
