- 10 -
Hardware Used
6. Assemble the reflector.
a. Screw 3pcs stud to the top of mesh, using
3pcs washer
Φ
6 to the bottom and 3pcs
washer
Φ
6 to the top.
b. Put the reflector on the stud and secure
them using 3pcs wing nut and 3pcs
washer.
x 3
x 3
x 9
AA
BB
Wing nut
Washer
Φ
6
CC
Stud
5. Assemble the upper protective mesh
to the heating body directly.
CAUTION: Do not hang clothing or any
other flammable materials from the heater,
or place on or near the heater. HOT! DO
NOT TOUCH!
CAUTION-HOT SURFACE
HOT WHILE IN OPERATION
DO NOT TOUCH
KEEP CHILDREN, CLOTHING
FURNITURE AND FLAMMABLES AWAY
5
B
6
AA
BB
CC
A
