background image

19 

OUTBACK® WARRANTY

OUTBACK® heater are warranted for a period of one (1) year from the date of purchase to 
the original purchaser against defects in materials and workmanship, OUTBACK® will 
supply replacements for defective parts free of charge provided that:

x

The product has not been used for trade, professional or hire purposes.

x

The product has not been subjected to misuse or neglect, including fat fires and flare ups 

or use of a faulty or incorrect regulator. 

x

The product has not sustained damage through foreign objects, substances or accidents.

x

The care and maintenance instructions given in your Outback manual have been followed.

If the product includes one or a number of parts or accessories, only the defective accessory 
or part will be replaced i.e. Hose, Regulator, Electric Ignitor and Reflector.

Fat fires are not covered under warranty.

Any warrany & guarantee claims shall be rendered void in the event of improper use of the 
heater or the use of non approved fuels, discolouration , rusting or slight deformation of 
parts exposed directly to the flames (burner) do not impair the function of the heater and do 
not form a basis for any claims.

This warranty is offered as an extra benefit and is in addition to the customers’ statutory 
rights.

OUTBACK® does not in any way warranty the gas cylinder.

In the unlikely event that you experience problems with this heater, please fill in our warranty 
form at: 

http://www.outbackbarbecues.com/warranty-form 

One of our colleagues will be in contact with you shortly.

HELPLINE NUMBER: 0345 388 6032

For reference and correspondence, record 
your serial number here.
(See sticker on side of barbecue body.)

Serial No.__________________

This number may be required when ordering 
spare parts or accessories. A part reference 
number may also be required where 
applicable.

Summary of Contents for OUT370665/PH300




















Reviews: