9
7
8
To aid in installation
place black silicone
ring on the middle
plate and then
install glass tube.
Ensure the rim of
the glass tube sits
firmly in the black
silicone ring.
BLACK SILICONE
RING
E
DD
HH
7. Carefully install the glass tube by lifting up and inserting through the center hole in the
upper plate. Ensure the black silicone ring is attached to the lower edge of the glass tube
as illustrated. Slide the glass tube through the hole of the lower plate cover and onto the
middle plate. Check and ensure that the glass tube is positioned properly and is completely
covering the center hole of the middle plate.
WARNING! The black silicone ring must be in place prior to operating the heater.
8. Assembly the protective guard.Hang the hooks of the protective guard onto the holes in
supports.
Secure the protective guards with fixing brackets with 4pcs 3/16" screws.
Hardware Used
DD
JJ
x 4
Philips
screwdriver
3/16” Screw
x 1
HH
Fixing
Bracket
x 4