background image

Care and Maintenance

Page 24 of 27

Griddle Top-

The griddle top has a Non-Stick Property and will easy to clean and maintain. In order to keep 

the good performance of coating,please follow the below steps during cooking:

- Please clean the griddle before use.
- It is better to use warm/hot water only.
- Do not place the dishwasher or use any other cleaning chemicals/materials.
- Do not use a metal brush,steel wool or abrasive material to clean the griddle as this could 

- Please avoid using excessive force scraping the surface as it is not needed since this griddle

has non-stick properties.

- Continued maintenance will ensure that cleanup is easier in the future 

and the user will have a more enjoyable cooking experience.

1.  Preheat the griddle to cook temperature, then apply oil (cooking spray is fine) 

on the surface before you begin cooking any food.

2.  After cooking, gently scrape away any remaining food residue and proceed 

to clean the griddle with a soft sponge. 

3.  When complete, heat the griddle top then apply more cooking oil (cooking spray is fine)

 on the griddle surface.

4.  Let the griddle top cool then store in a covered dry place .

damage the coating. 

Summary of Contents for 157969




























Reviews: